The harmonic block filters offered by us are made out of high quality material under stringent quality control. These harmonic filters have properties like low temperature rise and lower flux density to facilitate operation in worst conditions of ambient and harmonic overloads. These are provided by us at most affordable prices.

Features :

 

• High resistance to harmonics
• Very low losses
• Low noise
• Simple mounting
• Long useful life

We offer H. T. power capacitors up to 11 kV with all Associated Equipment.

Conforming to IS:2834-1986/IS: 13925 (Part-1) – 1998
Unit rating : 25 to 600 KV Ar., 1.1 kV to 11 KVAC.
Bank rating : Higher KVAr as per requirement in 11 kV voltage ratings.

• Dried under fine vacuum & controlled temperature and impregnated with non-PCB, non-toxic oil.
• Tested as per national and international standards.
• Life test as per international standards at higher voltage, higher temperature & long duration.
• Low losses of the order of 0.15w/kVAr.
• Units of any voltage & KVAr rating are available.

 

We offer Harmonic Reactors, designed with an iron-core and air gap. Manufacture from high quality material, the properties are designed in such a way so that it can operate in worst conditions also. An unreliable chain phenomenon may occur in cheaper and non-linear reactors during the period of operations of high harmonic values. Our reactors are safe and are available with filtering factor. Further the ratings can be developed on the request.

Filter Circuits are designed as three-phase reactors with an iron core and air gap. Harmonic Filter Reactors are made out of high quality material and very stringent quality control. It has been designed with properties like low temperature rise and lower flux density so that it can operate in worst conditions of ambient and harmonic overloads.

They offer very good degree of linearity and low losses.Cheaper and non- linear reactors may trigger undesirable chain phenomena during periods of operation with high harmonic values, such as reduction in the inductance with consequent increase in the resonance frequency of the LC group, which would drain off more harmonic current, further reducing its inductance and overload the reactor more and more. Reactors are available with filtering factor of 5.6%, 7% and 14% as per standard ratings. Any other filtering factor and rating can be developed on request.